OSHA Training Services
Providing the Best Industry based Training Services, with best Trainers .
About Our Trainings
This “Train-the-Trainer” course is structured to help participants acquire the competency for the company’s occupational health & safety training. This programme covers the criteria of the training programme, how to develop successful training, including best practices for health and safety training presentations. This training also addresses significant principles of safety and health that every teacher needs to know.
| Hours | Course title |
|---|---|
| 132-hours | Occupational Safety and Health Professional (International Students) |
| 48-hours | Occupational Safety and Health Manager |
| 44-hours | Occupational Safety and Health Supervisor / Specialist |
| 36-hours | Occupational Safety and Health Supervisor |
| 36-hours | Occupational Safety and Health Trainer (Train-the-Trainer) |
| 36-hours | Safety Committee Chair |
| 30-hours | 30-hour General Industry Safety and Health |
CONSTRUCTION SAFETY
| Hours | Course title |
|---|---|
| 192-hours | Construction Safety and Health Professional |
| 162-hours | Construction Safety and Health Manager |
| 145-hours | Construction Site Safety Supervisor |
| 130-hours | Construction Safety and Health Specialist |
| 30-hours | 30-hour Construction Safety and Health |
| 47-hours | Construction Safety and Health Train-the-Trainer |
| 10-hours | 10-hour Construction Safety and Health |
oil and gas
| Hours | Course title |
|---|---|
| 213-hours | Oil and Gas Safety and Health Professional |
| 164-hours | Oil and Gas Safety and Health Supervisor |
| 155-hours | Oil and Gas Safety and Health Specialist |
| 130-hours | Oil and Gas Safety and Health Train-The-Trainer |
| 192-hours | Oil and Gas Safety and Health Manager |
Hazardous Waste Operations & Emergency Response
| Hours | Course title |
|---|---|
| 40-hours | 40-hour HAZWOPER for General Site Workers |
Train-the-Trainer-36-hour
Participants will complete all the necessary courses mentioned below to apply for this programme certificate.
• 700 Introduction to Safety Management
• 703 Introduction to OSH Training
• 704 Hazard Analysis and Control
• 706 Conducting a Job Hazard Analysis
• 711 Introduction to Ergonomics
• 721 Developing OSH Training
• 723 Conducting OSH Training
Frequently asked questions
You are probably already helpful in for others that are keen to help them understand their responsibilities whether you are either a safety instructor or are preparing to become one. You would be able to:
• Build on your established abilities.
• Develop your skills for presentation.
• Increase your awareness of the advancement of safety training.
• Learn how to perform safety training efficiently.
• In your office, make a distinction.
• Build a resume that is more impressive.
This training programme is intended for safety trainers or any other persons in charge of ensuring that workers know how to operate in a safe way. This initiative also helps people who are striving to fulfil their career objective of being a safety teacher. As a safety teacher, this curriculum helps you develop the important skills you would need for the career path.
Yes for sure.
• In order to be approved as a professional safety trainer. employees should:
• Have understanding of the topic being taught and expertise;
• Pass a course called “Train-the-Trainer” and;
• Have their expertise and presentation abilities tested by a qualified individual.
The OSHA Train the trainer course is planned to be delivered in 36 Hours class training.
All modules are internally evaluated by the 2 hours multiple choice exam with 70% passing number are mandatory to get certified.
Give us call/ WhatsApp or email to get current fee.
CONSTRUCTION SAFETY AND HEALTH TRAIN-THE-TRAINER
The “Train-the-Trainer” programme is developed for participants /employees and employers develop the expertise and skills required to perform occupational safety training throughout the construction industry. This programme covers the criteria of the training programme, how to develop successful training, and best practices for safety and health training presentations. This curriculum also addresses important and applicable subjects in the domain of safety and health that are required for any construction instructor.
Course Outline
Participants will complete all the necessary courses mentioned below to apply for this programme certificate.
- 703 Introduction to OSH Training
- 706 Conducting a Job Hazard Analysis
- 709 Personal Protective Equipment
- 721 Developing OSH Training
- 723 Conducting OSH Training
- 800 Intro to Construction Safety
- Management
- 806 Focus Four – Falls
- 807 Focus Four – Caught-In/Between
- 808 Focus Four – Struck-By
- 809 Focus Four – Electrocution
- 813 Construction Worksite Safety
- 850 Health Hazards in Construction
Frequently asked questions
You are probably already great at training people and are enthusiastic about helping them understand the responsibilities whether you are either a construction safety instructor or are preparing to become one.
You would be able to:
- Build on your established abilities.
- Develop your skills for presentation.
- Increase your awareness of the advancement of safety training.
- Learn how to perform safety training efficiently.
- In your office, make a distinction.
- Build a resume that is more impressive.
Yes for sure.
In order to be approved as a professional safety trainer. employees should:
Have understanding of the topic being taught and expertise;
Pass a course called “Train-the-Trainer” and;
Have their expertise and presentation abilities tested by a qualified individual.
Yes for sure.
• In order to be approved as a professional safety trainer. employees should:
• Have understanding of the topic being taught and expertise;
• Pass a course called “Train-the-Trainer” and;
• Have their expertise and presentation abilities tested by a qualified individual.
- 1 program certificate
- 12 course certificates
- Trainer Wallet Card
- Course Transcript
All modules are evaluated by the 2 hours multiple choice exam with 70% passing number are mandatory to get certified.
Give us call/ WhatsApp or email to get current fee.
70-Hour |OIL AND GAS SAFETY AND HEALTH | TRAIN-THE-TRAINER
The “Train-the-Trainer” programme is developed for participants /employees and employers develop the expertise and skills required to perform occupational safety training throughout the construction industry. This programme covers the criteria of the training programme, how to develop successful training, and best practices for safety and health training presentations. This curriculum also addresses important and applicable subjects in the domain of safety and health that are required for any construction instructor.
Course Outline
Participants will complete all the necessary courses mentioned below to apply for this programme certificate.
- 700 Introduction to Safety Management
- 703 Introduction to OSH Training
- 704 Hazard Analysis and Control
- 706 Conducting a Job Hazard Analysis
- 711 Introduction to Ergonomics
- 721 Developing OSH Training
- 723 Conducting OSH Training
- 901 Oil and Gas Hazard Awareness
- 902 Well Site Preparation & Drilling Safety
- 903 Well Site Completion & Servicing Safety
- 908 Offshore Oil and Gas Safety I
- 909 Offshore Oil and Gas Safety II
Frequently asked questions
Individuals responsible for carrying out safety training in the oil & gas companies can carry out all the instruction they want, but that does not guarantee that the instruction will be effective. If you need this curriculum from all safety trainers within your company, you will be able to:
Ensure that the safety requirements of management are conveyed to all oil and gas workers effectively.
Educate trainers on how good behavior can be influenced.
Empower staff to operate in a protected manner in order to achieve organizational objectives.
Because trainers are the bridge between management and employees, it is vital they have the tools and knowledge to be effective.
This training programme is intended for oil and gas industry safety trainers or any other persons in charge of ensuring that workers on construction site know how to operate in a safe way.
- 1 program certificate
- 12 course certificates
- Trainer Wallet Card
- Course Transcript
Give us call/ WhatsApp or email to get current fee.
155-hour OIL AND GAS SAFETY AND HEALTH SPECIALIST
Oil and Gas, which is a dangerous task, allows staff to have specific safety knowledge so that they can do it and make safety plans for themselves and their colleagues, so that it can be performed in the best possible way. Oil and Gas safety experts are advised to keep an eye on the safety system so that employees can be informed of their safety in accordance with the latest procedures.
Students must be aware of the oil and gas sector through this program. The importance of safety in this sector will be made known to them. In addition to safety information, they will be trained for drilling at sea and on the beach (Onshore and offshore). Knowledge will be added to the guidance of this Safety and Health program and the way their work will be refined so that they can do their job in the best possible way.
Course Outline
- Introduction to Safety Management
- Effective Accident Investigation
- Introduction to OSH Training
- Hazard Analysis and Control
- Hazard Communication Program
- Conducting a Job Hazard Analysis
- Personal Protective Equipment
- Energy Control Program – LOTO
- Introduction to Ergonomics
- Confined Space Program
- Fall Protection Program
- Electrical Safety Basics
- Emergency Action Plans
- Introduction to Machine Guarding
- Introduction to Industrial Hygiene
- Hearing Conservation Program Mgmt
- Bloodborne Pathogens Program Mgmt
- Trench and Excavation Safety
- Fall Protection in Construction
- Oil and Gas Hazard Awareness
- Well Site Preparation & Drilling Safety
- Well Site Completion & Servicing Safety
- Oil Spill Cleanup
- Offshore Oil and Gas Safety
- Offshore Oil and Gas Safety II
Frequently asked questions
Oil and gas safety and health professionals are better than average workers because they are usually well trained, experienced and trained in the best way possible. As a result of which additional duties, responsibilities and compensation are usually given to an expert. The expert shall provide practical support and training to employees at work.
Oil and gas safety and health superintendents usually have technical training, information and experience, but there are also many other responsibilities. As a result, some courses have been included in the supervisory program which are also part of the specialist program and two more courses have been added along with it, so that the position of the supervisor can be taken to the next level.
The course is planned to be delivered in 155 Hours class training around 20 days.
Yes- daily class duration will be 120 Minutes so it will take around 80 days to complete the course.
Give us call/ WhatsApp or email to get current fee.
48-hour OCCUPATIONAL SAFETY AND HEALTH MANAGER
Companies are currently hiring health and safety managers to plan, perform best and spread their work so that their business can grow. If you are a member of the safety and health management, you should have to know all the safety details you need.
OSHA managers or directors who are responsible for the health and safety program of their company and organization. Knowledge will be added to the guidance of this Safety and Health program and the way their work will be refined so that they can do their job in the best possible way.
Course Outline
- Introduction to Safety Management
- Effective Safety Committee Operations
- Effective Accident Investigation
- Safety Supervision and Leadership
- Safety Management System Evaluation
- Emergency Action Plans
- Fire Prevention Plans
- Fleet Safety Management
- Ergonomics Program Management
Frequently asked questions
The course is planned to be delivered in 48 Hours class training around 6 days.
Yes- daily class duration will be 120 Minutes so it will take around 80 days to complete the course.
Give us call/ WhatsApp or email to get current fee.
30-hour General Industry Safety and Health
The goals of The 30-hour General Industry Safety and Health are to educate the workers of the common industry about Safety issues and to improve their working procedure. The course offers training for workers and managers with instruction on the distinguishing, relieve, precaution and minimizes accidents that happen in the workplaces due to lack of safety procedures. Furthermore, this course will teacher you how to raise your voice, be aware of your duties, and how to develop safety culture.
- The Hazard Communication
- PPE’s
- Foundation to Safety Supervision
- Foundation to Safety Leadership
- Walking-Working Surfaces and Fall Protection
- Electrical Safety for Workers
- Foundation to Safety Accountability
- Foundation to Safety Recognition
- Foundation to Safety Training
- Foundation to Hazard Controls
- Foundation to Job Hazard Analysis
- Foundation to OSHA
- General Industry Ergonomic Hazards
- Safeguarding of Machine
- The Safety of Welding activity
- The safety of Forklift
- Safe Confined Space Entry
- Electrical Hazards & Controls Measure
- Managing Safety and Health in General Industry
- Safety of Materials Handling
- Lock out Tag out (LOTO)
- Workplace Emergencies procedures and planning
- The workplace Bloodborne Pathogens
Frequently asked questions
The 30-hour General Industry Safety and Health course (OSHA Training course) also offers high and excellent training to the workers as well as to make them aware of special safety issues.
All modules are internally evaluated by the 2 hours multiple choice exam with 70% passing number are mandatory to get certified.
Give us call/ WhatsApp or email to get current fee.