OSHA Training Services

Providing the Best Industry based Training Services, with best Trainers .

About Our Trainings

This “Train-the-Trainer” course is structured to help participants acquire the competency for the company’s occupational health & safety training. This programme covers the criteria of the training programme, how to develop successful training, including best practices for health and safety training presentations. This training also addresses significant principles of safety and health that every teacher needs to know.

table
Hours Course title
132-hours Occupational Safety and Health Professional (International Students)
48-hours Occupational Safety and Health Manager
44-hours Occupational Safety and Health Supervisor / Specialist
36-hours Occupational Safety and Health Supervisor
36-hours Occupational Safety and Health Trainer (Train-the-Trainer)
36-hours Safety Committee Chair
30-hours 30-hour General Industry Safety and Health

CONSTRUCTION SAFETY

table
Hours Course title
192-hours Construction Safety and Health Professional
162-hours Construction Safety and Health Manager
145-hours Construction Site Safety Supervisor
130-hours Construction Safety and Health Specialist
30-hours 30-hour Construction Safety and Health
47-hours Construction Safety and Health Train-the-Trainer
10-hours 10-hour Construction Safety and Health

oil and gas

table
Hours Course title
213-hours Oil and Gas Safety and Health Professional
164-hours Oil and Gas Safety and Health Supervisor
155-hours Oil and Gas Safety and Health Specialist
130-hours Oil and Gas Safety and Health Train-The-Trainer
192-hours Oil and Gas Safety and Health Manager

Hazardous Waste Operations & Emergency Response

table
Hours Course title
40-hours 40-hour HAZWOPER for General Site Workers
Aerial view oil terminal is industrial facility for storage tank of oil and petrochemical industry products ready for transport to further storage facilities.
osha


Train-the-Trainer-36-hour

Participants will complete all the necessary courses mentioned below to apply for this programme certificate.
• 700 Introduction to Safety Management
• 703 Introduction to OSH Training
• 704 Hazard Analysis and Control
• 706 Conducting a Job Hazard Analysis
• 711 Introduction to Ergonomics
• 721 Developing OSH Training
• 723 Conducting OSH Training

Frequently asked questions

WHAT ARE THE BENEFITS TO COMPLETE TRAIN THE TRAINER PROGRAM FOR INDIVIDUAL?

You are probably already helpful in for others that are keen to help them understand their responsibilities whether you are either a safety instructor or are preparing to become one. You would be able to:

Build on your established abilities.

Develop your skills for presentation.

Increase your awareness of the advancement of safety training.

Learn how to perform safety training efficiently.

In your office, make a distinction.

Build a resume that is more impressive.

WHO SHOULD ATTEND TRAIN THE TRAINER PROGRAM?

 This training programme is intended for safety trainers or any other persons in charge of ensuring that workers know how to operate in a safe way. This initiative also helps people who are striving to fulfil their career objective of being a safety teacher. As a safety teacher, this curriculum helps you develop the important skills you would need for the career path.

CAN MY EMPLOYER CERTIFY ME AS A QUALIFIED SAFETY TRAINER AFTER COMPLETION OF OSHA TRAIN THE TRAINER COURSE?

Yes for sure.

In order to be approved as a professional safety trainer. employees should:

Have understanding of the topic being taught and expertise;

Pass a course called “Train-the-Trainer” and;

Have their expertise and presentation abilities tested by a qualified individual.

WHAT IS THE DURATION FOR COMPLETION OF OSHA TRAIN THE TRAINER COURSE?

The OSHA Train the trainer course is planned to be delivered in 36 Hours class training.

WHAT IS THE ASSESSMENT METHOD?

All modules are internally evaluated by the 2 hours multiple choice exam with 70% passing number are mandatory to get certified.

 

HOW MUCH DOES IT COST?

Give us call/ WhatsApp or email to get current fee.

CONSTRUCTION SAFETY AND HEALTH TRAIN-THE-TRAINER

The “Train-the-Trainer” programme is developed for participants /employees and employers develop the expertise and skills required to perform occupational safety training throughout the construction industry. This programme covers the criteria of the training programme, how to develop successful training, and best practices for safety and health training presentations. This curriculum also addresses important and applicable subjects in the domain of safety and health that are required for any construction instructor.

 

Course Outline

Participants will complete all the necessary courses mentioned below to apply for this programme certificate.

  • 703 Introduction to OSH Training
  • 706 Conducting a Job Hazard Analysis
  • 709 Personal Protective Equipment
  • 721 Developing OSH Training
  • 723 Conducting OSH Training
  • 800 Intro to Construction Safety
  • Management
  • 806 Focus Four – Falls
  • 807 Focus Four – Caught-In/Between
  • 808 Focus Four – Struck-By
  • 809 Focus Four – Electrocution
  • 813 Construction Worksite Safety
  • 850 Health Hazards in Construction

Frequently asked questions

WHAT ARE THE BENEFITS TO COMPLETE TRAIN THE TRAINER PROGRAM FOR INDIVIDUAL?

You are probably already great at training people and are enthusiastic about helping them understand the responsibilities whether you are either a construction safety instructor or are preparing to become one.



You would be able to:

  • Build on your established abilities.
  • Develop your skills for presentation.
  • Increase your awareness of the advancement of safety training.
  • Learn how to perform safety training efficiently.
  • In your office, make a distinction.
  • Build a resume that is more impressive.
CAN MY EMPLOYER CERTIFY ME AS A QUALIFIED SAFETY TRAINER AFTER COMPLETION OF OSHA TRAIN THE TRAINER COURSE?

Yes for sure.

In order to be approved as a professional safety trainer. employees should:

Have understanding of the topic being taught and expertise;

Pass a course called “Train-the-Trainer” and;

Have their expertise and presentation abilities tested by a qualified individual.

CAN MY EMPLOYER CERTIFY ME AS A QUALIFIED SAFETY TRAINER AFTER COMPLETION OF OSHA TRAIN THE TRAINER COURSE?

Yes for sure.

In order to be approved as a professional safety trainer. employees should:

Have understanding of the topic being taught and expertise;

Pass a course called “Train-the-Trainer” and;

Have their expertise and presentation abilities tested by a qualified individual.

HOW MANY CERTIFICATES A STUDENT WILL RECEIVE ON PASSING OF THIS COURSE?
  • 1 program certificate
  • 12 course certificates
  • Trainer Wallet Card
  • Course Transcript

 

WHAT IS THE ASSESSMENT METHOD?

All modules are evaluated by the 2 hours multiple choice exam with 70% passing number are mandatory to get certified.

HOW MUCH DOES IT COST?

Give us call/ WhatsApp or email to get current fee.

70-Hour |OIL AND GAS SAFETY AND HEALTH | TRAIN-THE-TRAINER

The “Train-the-Trainer” programme is developed for participants /employees and employers develop the expertise and skills required to perform occupational safety training throughout the construction industry. This programme covers the criteria of the training programme, how to develop successful training, and best practices for safety and health training presentations. This curriculum also addresses important and applicable subjects in the domain of safety and health that are required for any construction instructor.

 

Course Outline

Participants will complete all the necessary courses mentioned below to apply for this programme certificate.

  • 700 Introduction to Safety Management
  • 703 Introduction to OSH Training
  • 704 Hazard Analysis and Control
  • 706 Conducting a Job Hazard Analysis
  • 711 Introduction to Ergonomics
  • 721 Developing OSH Training
  • 723 Conducting OSH Training
  • 901 Oil and Gas Hazard Awareness
  • 902 Well Site Preparation & Drilling Safety
  • 903 Well Site Completion & Servicing Safety
  • 908 Offshore Oil and Gas Safety I
  • 909 Offshore Oil and Gas Safety II

Frequently asked questions

WHAT ARE THE BENEFITS TO COMPLETE TRAIN THE TRAINER PROGRAM IN OIL AND GAS SECTOR FOR COMPANIES?

Individuals responsible for carrying out safety training in the oil & gas companies can carry out all the instruction they want, but that does not guarantee that the instruction will be effective. If you need this curriculum from all safety trainers within your company, you will be able to:

Ensure that the safety requirements of management are conveyed to all oil and gas workers effectively.

Educate trainers on how good behavior can be influenced.

Empower staff to operate in a protected manner in order to achieve organizational objectives.

Because trainers are the bridge between management and employees, it is vital they have the tools and knowledge to be effective.

WHO SHOULD ATTEND CONSTRUCTION TRAIN THE TRAINER PROGRAM?

This training programme is intended for oil and gas industry safety trainers or any other persons in charge of ensuring that workers on construction site know how to operate in a safe way.

CAN MY EMPLOYER CERTIFY ME AS A QUALIFIED SAFETY TRAINER AFTER COMPLETION OF OSHA TRAIN THE TRAINER COURSE?

Yes for sure.

In order to be approved as a professional safety trainer in oil and gas sector. Employees should:

Have understanding of the topic being taught and expertise;

Pass a course called “Train-the-Trainer” and;

Have their expertise and presentation abilities tested by a qualified individual.

HOW MANY CERTIFICATES A STUDENT WILL RECEIVE ON PASSING OF THIS COURSE?
  • 1 program certificate
  • 12 course certificates
  • Trainer Wallet Card
  • Course Transcript

 

HOW MUCH DOES IT COST?

Give us call/ WhatsApp or email to get current fee.

155-hour OIL AND GAS SAFETY AND HEALTH SPECIALIST

Oil and Gas, which is a dangerous task, allows staff to have specific safety knowledge so that they can do it and make safety plans for themselves and their colleagues, so that it can be performed in the best possible way. Oil and Gas safety experts are advised to keep an eye on the safety system so that employees can be informed of their safety in accordance with the latest procedures.

Students must be aware of the oil and gas sector through this program. The importance of safety in this sector will be made known to them. In addition to safety information, they will be trained for drilling at sea and on the beach (Onshore and offshore). Knowledge will be added to the guidance of this Safety and Health program and the way their work will be refined so that they can do their job in the best possible way.

  1. Course Outline

  2. Introduction to Safety Management
  3. Effective Accident Investigation
  4. Introduction to OSH Training
  5. Hazard Analysis and Control
  6. Hazard Communication Program
  7. Conducting a Job Hazard Analysis
  8. Personal Protective Equipment
  9. Energy Control Program – LOTO
  10. Introduction to Ergonomics
  11. Confined Space Program
  12. Fall Protection Program
  13. Electrical Safety Basics
  14. Emergency Action Plans
  15. Introduction to Machine Guarding
  16. Introduction to Industrial Hygiene
  17. Hearing Conservation Program Mgmt
  18. Bloodborne Pathogens Program Mgmt
  19. Trench and Excavation Safety
  20. Fall Protection in Construction
  21. Oil and Gas Hazard Awareness
  22. Well Site Preparation & Drilling Safety
  23. Well Site Completion & Servicing Safety
    •  
  • Oil Spill Cleanup
  • Offshore Oil and Gas Safety
  • Offshore Oil and Gas Safety II

Frequently asked questions

WHAT IS THE DIFFERENCE BETWEEN THE SPECIALIST PROGRAM AND THE SUPERVISOR PROGRAM?

Oil and gas safety and health professionals are better than average workers because they are usually well trained, experienced and trained in the best way possible. As a result of which additional duties, responsibilities and compensation are usually given to an expert. The expert shall provide practical support and training to employees at work.

Oil and gas safety and health superintendents usually have technical training, information and experience, but there are also many other responsibilities. As a result, some courses have been included in the supervisory program which are also part of the specialist program and two more courses have been added along with it, so that the position of the supervisor can be taken to the next level.

WHAT IS THE DURATION FOR COMPLETION OF OIL AND GAS SAFETY COURSE?

The course is planned to be delivered in 155 Hours class training around 20 days.

 

IS IT POSSIBLE TO ATTEND ONLINE CLASS OF OIL AND GAS SAFETY PROGRAM?

Yes- daily class duration will be 120 Minutes so it will take around 80 days to complete the course.



HOW MUCH DOES IT COST?

Give us call/ WhatsApp or email to get current fee.

48-hour OCCUPATIONAL SAFETY AND HEALTH MANAGER

Companies are currently hiring health and safety managers to plan, perform best and spread their work so that their business can grow. If you are a member of the safety and health management, you should have to know all the safety details you need.

OSHA managers or directors who are responsible for the health and safety program of their company and organization. Knowledge will be added to the guidance of this Safety and Health program and the way their work will be refined so that they can do their job in the best possible way.

Course Outline

  1. Introduction to Safety Management
  2. Effective Safety Committee Operations
  3. Effective Accident Investigation
  4. Safety Supervision and Leadership
  5. Safety Management System Evaluation
  6. Emergency Action Plans
  7. Fire Prevention Plans
  8. Fleet Safety Management
  9. Ergonomics Program Management

Frequently asked questions

WHAT IS THE DURATION FOR COMPLETION OF SAFETY MANAGER COURSE?

The course is planned to be delivered in 48 Hours class training around 6 days.

IS IT POSSIBLE TO ATTEND ONLINE CLASS OF OIL AND GAS SAFETY PROGRAM?

Yes- daily class duration will be 120 Minutes so it will take around 80 days to complete the course.



HOW MUCH DOES IT COST?

Give us call/ WhatsApp or email to get current fee.

30-hour General Industry Safety and Health

The goals of The 30-hour General Industry Safety and Health are to educate the workers of the common industry about Safety issues and to improve their working procedure. The course offers training for workers and managers with instruction on the distinguishing, relieve, precaution and minimizes accidents that happen in the workplaces due to lack of safety procedures. Furthermore, this course will teacher you how to raise your voice, be aware of your duties, and how to develop safety culture.

  • The Hazard Communication
  • PPE’s
  • Foundation to Safety Supervision
  • Foundation to Safety Leadership
  • Walking-Working Surfaces and Fall Protection
  • Electrical Safety for Workers
  • Foundation to Safety Accountability
  • Foundation to Safety Recognition
  • Foundation to Safety Training
  • Foundation to Hazard Controls
  • Foundation to Job Hazard Analysis
  • Foundation to OSHA
  • General Industry Ergonomic Hazards
  • Safeguarding of Machine
  • The Safety of Welding activity
  • The safety of Forklift
  • Safe Confined Space Entry
  • Electrical Hazards & Controls Measure
  • Managing Safety and Health in General Industry
  • Safety of Materials Handling
  • Lock out Tag out (LOTO)
  • Workplace Emergencies procedures and planning
  • The workplace Bloodborne Pathogens

Frequently asked questions

WHO SHOULD ATTEND OSHA 30-HOUR GENERAL INDUSTRY SAFETY AND HEALTH PROGRAM?

The 30-hour General Industry Safety and Health course (OSHA Training course) also offers high and excellent training to the workers as well as to make them aware of special safety issues.

 

WHAT IS THE ASSESSMENT METHOD?

All modules are internally evaluated by the 2 hours multiple choice exam with 70% passing number are mandatory to get certified.

 

HOW MUCH DOES IT COST?

Give us call/ WhatsApp or email to get current fee.

Contact US

Frequently asked questions